Post-doc possition in the OPUS 22 project nr. 2021/43/B/ST8/01831 - no person selected

On March 14, 2025, the competition committee announced that no person meeting the formal and substantive requirements for the post-doc position had applied in the competition for employment in project OPUS 22 nr 2021/43/B/ST8/01831 „A new tool for studying the coelectrolysis process in Solid Oxide Electrolysis Cells using carbon dioxide isotopologue”.

The announcement of the competition has been linked on the website of Gdańsk Tech: https://praca.pg.edu.pl/jobs/m/3536/pl.

Decision for 2 Scholarship possitions in the M-ERA.NET3 Call 2022 project of Sebastian Molin

On January 28th, 2025, the competition committee chose a PhD Student MSc. Muhammad Tasaduq Ilyas and a Student of FETI Kacper Mróz for 2 scholarship positions in the project M-ERA.NET3 Call 2022 nr 2022/04/Y/ST5/00165 „Defective metal oxides as the next generation of lead-free piezoelectrics for ultrasonic actuators”.

A person chosen for a PhD Student Scholarship possition in the OPUS 25 project nr. 2023/49/B/ST8/03265

On January 28th, 2025, the competition committee chose MSc. Tanvir Ahmed for the PhD Student Scholarship positions in the project OPUS 25 nr 2023/49/B/ST8/03265 „Alternative to alloying: advanced protective coatings for low-cost alloys for solid oxide cell stack technology”.

PhD student-scholarship position in an M-ERA.NET Call 2022 project of Sebastian Molin

[PL] Oferta stypendialna na stanowisko doktoranta w projekcie M-ERA.NET Call 2022 nr. 2022/04/Y/ST5/00165 finansowanego przez Narodowe Centrum Nauki pt. "Zdefektowane tlenki metali - nowa generacja bezołowiowych materiałów piezoelektrycznych dla przetworników ultradźwiękowych".
[EN] PhD student-scholarship position in an M-ERA.NET Call 2022 project nr. 2022/04/Y/ST5/00165 funded by National Science Centre entitled "Defective metal oxides as the next generation of lead-free piezoelectrics for ultrasonic actuators".

Requirements:

  • Education: higher (MSc, MSc. Eng.) in a field of materials engineering, chemistry, electronics, or other related.
  • Professional experience: participation in a scientific project, attendances in scientific conferences for students, co-author in conference/journal publications.
  • The minimum required knowledge and experience: basic knowledge in materials engineering, laboratory skills, good organization.
  • English language skills at an advanced level.
  • PhD student status (enrolled at Doctoral School).

Tasks:

  • Preparation of new materials.
  • Electrical and electrochemical characterization of materials.
  • Preparation of scientific manuscripts for publication.
  • Presentation of results at scientific conferences.

Required documents:

  • CV;
  • Motivational letter;
  • Certificate of participation in Doctoral School.

Type of NCN competition: NCN, M-ERA.NET Call 2022
Deadline for applications: 24.01.2025, the results will be announced on 28.01.2025. The earliest start date is 01.02.2025.
Conditions of employment: scholarship 2000 PLN/month – 12 months contract.
Additional information: please ask any questions by email to  This email address is being protected from spambots. You need JavaScript enabled to view it.
To apply, please send your CV and motivation letter to the e-mail address:  This email address is being protected from spambots. You need JavaScript enabled to view it.  (PI of the project).

Student-scholarship position in a M-ERA.NET Call 2022 project of Sebastian Molin

[PL] Oferta stypendialna na stanowisko studenta-stypendysty w projekcie M-ERA.NET Call 2022 nr. 2022/04/Y/ST5/00165 finansowanego przez Narodowe Centrum Nauki pt. "Zdefektowane tlenki metali - nowa generacja bezołowiowych materiałów piezoelektrycznych dla przetworników ultradźwiękowych".
[EN] student-scholarship position in an M-ERA.NET Call 2022 project nr. 2022/04/Y/ST5/00165 funded by National Science Centre entitled "Defective metal oxides as the next generation of lead-free piezoelectrics for ultrasonic actuators".

Requirements:

  • Education: student in a field of materials engineering, chemistry, electronics, or other related.
  • Professional experience: experience with laboratory work, participation in scientific projects, attendances in scientific conferences for students.
  • The minimum required knowledge and experience: basic knowledge in materials engineering, laboratory skills, good organization.
  • English language skills at an advanced level.
  • Student status (BSc/MSc studies).

Tasks:

  • Preparation of electrode materials by different means (electrodeposition, sputtering).
  • Electrical and electrochemical characterization of electrodes.

Required documents:

  • CV;
  • Motivational letter.

Type of NCN competition: NCN, M-ERA.NET Call 2022
Deadline for applications: 24.01.2025, the results will be announced on 28.01.2025. The earliest start date is 01.02.2025.
Conditions of employment: scholarship 1500 PLN/month – 12 months contract.
Additional information: please ask any questions by email to  This email address is being protected from spambots. You need JavaScript enabled to view it.
To apply, please send your CV and motivation letter to the e-mail address:  This email address is being protected from spambots. You need JavaScript enabled to view it.  (PI of the project).

PhD student-scholarship position in an Opus 25 project of prof. Piotr Jasiński

[PL] Oferta stypendialna na stanowisko doktoranta w projekcie Opus 25 nr. 2023/49/B/ST8/03265 finansowanego przez Narodowe Centrum Nauki pt. "Alternatywne rozwiązanie dla dodatków stopowych: zaawansowane powłoki ochronne niskokosztowych stali z zastosowaniem w technologii stosów stałotlenkowych ogniw elektrochemicznych".
[EN] PhD student-scholarship position in an Opus 25 project nr. 2023/49/B/ST8/03265 funded by National Science Centre entitled "Alternative to alloying: advanced protective coatings for low-cost alloys for solid oxide cell stack technology".

Requirements:

  • Education: higher (MSc, MSc. Eng.) in a field of materials engineering, chemistry, electronics, or other related.
  • Professional experience: participation in a scientific project, attendances in scientific conferences for students, co-author in conference/journal publications.
  • The minimum required knowledge and experience: basic knowledge in materials engineering, laboratory skills, good organization.
  • English language skills at an advanced level – reading and active writing skills.
  • PhD student status (enrolled at Doctoral School).

Tasks:

  • Preparation of materials: synthesis and basic characterization
  • Electrochemical characterization of fuel/electrolysis cells – evaluation of Cr-exposure effects
  • Preparation of scientific manuscripts for publication.
  • Presentation of results at scientific conferences.

Required documents:

  • CV;
  • Motivational letter;
  • Certificate of participation in Doctoral School.

Type of NCN competition: NCN Opus, edition 49
Deadline for applications: 24.01.2025 – 12:00, the results will be announced on 28.01.2025. The earliest start date is 01.02.2025.
Conditions of employment: scholarship 2000 PLN/month – 30 months contract.
Additional information: please ask any questions by email to  This email address is being protected from spambots. You need JavaScript enabled to view it.
To apply, please send your CV and motivation letter to the e-mail address:  This email address is being protected from spambots. You need JavaScript enabled to view it.  (PI of the project).

A place for the PhD-Student in PoRaCoat project, financed by M-ERA.NET 3 Call 2023 Programme - renewed up till 23.02.2025

To the project "Innovative stent coating with polyphenol-rapamycin complex with improved drug-eluting properties to target in-stent restenosis (PoRaCoat)", financed by M-ERA.NET3 Call 2023 and the National Center for Research and Development, realised in dates 01.06.2024-31.05.2027, the Department of Functional Materials Engineering is looking for a PhD-Student.

Requirements:

  • Education: MSc. Eng./MSc. (participant of the Doctoral School or with possible recruitment to the Doctoral School) in biomedical engineering, materials engineering, chemistry, electronics, or related fields.
  • Professional experience: Research tasks performed as part of the engineering/master's thesis should be related to biomedical applications, materials engineering, or a related field; participation in a scientific project, a scientific conference for students, or co-authorship of conference publications/journals is welcome.
  • Minimum required scope of knowledge and experience: basic knowledge of materials engineering (in particular: polymers, conducting polymers) and electrochemistry (performing basic measurements), fundamental analysis of the structure and morphology of materials; knowledge of English at an advanced level.

Tasks to be performed:

  • Synthesis of a stent coating based on PEDOT and a drug complex by the adopted project assumptions,
  • Preparation of polymer coating samples on Co-Cr platforms for mechanical, aging, climatic, transport, and EO tests and degradation studies, and drug release analysis.
  • Preparation of reports and manuscripts from the conducted research, presentation of results at scientific conferences - preparation of scientific manuscripts for publication,
  • Participation in international team meetings.

Type of competition: NCBiR: M-ERA.NET3 Call 2023 (contract number: M-ERA.NET3/2023/92/PoRaCoat/2024)

Deadline for submitting applications: 23.02.2025, 23:59 CET

Employment conditions: contract of mandate 3000-4000 PLN/month + for student-doctoral successful recruitment to the Gdańsk Tech Doctoral School

To apply, please send your CV and cover letter to This email address is being protected from spambots. You need JavaScript enabled to view it. (PI: Dr inż. Karolina Cysewska). We will contact only selected candidates.

Date of posting the ad of extention: 08.01.2025.

No decision regarding the competition for the position of PhD Student/Student in the project M-ERA.NET3 Call 2023, realised by the team under direction of PhD Eng. Karolina Cysewska

The head of the scientific project, PhD Eng. Karolina Cysewska, informs that in connection with the previous announcements of 23.10.2024 and 12.11.2024, the PhD Student/Student was not selected in the project "Innovative stent coating with polyphenol-rapamycin complex with improved drug-eluting properties to target in-stent restenosis (PoRaCoat)", implemented with the support of funding from the National Center for Research and Development from the M-ERA.NET 3 Call 2023 competition, co-financed for 36 months between 01.06.2024 and 31.05.2027 (contract number: M-ERA.NET3/2023/92/PoRaCoat/2024).

A place for the PhD-Student/Student in PoRaCoat project, financed by M-ERA.NET 3 Call 2023 Programme - extended up to 24.11.2024

To the project "Innovative stent coating with polyphenol-rapamycin complex with improved drug-eluting properties to target in-stent restenosis (PoRaCoat)", financed by M-ERA.NET 3 Call 2023 and the National Center for Research and Development, realised in dates 01.06.2024-31.05.2027, the Department of Functional Materials Engineering is looking for a PhD-Student/Student.

Requirements:

  • Education: first/second cycle student or MSc. Eng./MSc. (participant of the Doctoral School or with possible recruitment to the Doctoral School) in biomedical engineering, materials engineering, chemistry, electronics, or related fields.
  • Professional experience: Research tasks performed as part of the engineering/master's thesis should be related to biomedical applications, materials engineering, or a related field; participation in a scientific project, a scientific conference for students, or co-authorship of conference publications/journals is welcome.
  • Minimum required scope of knowledge and experience: basic knowledge of materials engineering (in particular: polymers, conducting polymers) and electrochemistry (performing basic measurements), fundamental analysis of the structure and morphology of materials; knowledge of English at an advanced level.

Tasks to be performed:

  • Synthesis of a stent coating based on PEDOT and a drug complex by the adopted project assumptions,
  • Preparation of polymer coating samples on Co-Cr platforms for mechanical, aging, climatic, transport, and EO tests and degradation studies, and drug release analysis.
  • Preparation of reports and manuscripts from the conducted research, presentation of results at scientific conferences - preparation of scientific manuscripts for publication,
  • Participation in international team meetings.

Type of competition: NCBiR: mERA-NET 3 Call 2023

Deadline for submitting applications: 11.11.2024, 23:59 CET Extention date up to: 24.11.2024, 23:59 CET

Employment conditions: contract of mandate 3000-4000 PLN/month + for student-doctoral successful recruitment to the Gdańsk Tech Doctoral School

To apply, please send your CV and cover letter to This email address is being protected from spambots. You need JavaScript enabled to view it. (PI: Dr inż. Karolina Cysewska). We will contact only selected candidates.

Date of posting the ad: 23.10.2024. Date of posting the extention: 12.11.2024.

New project realised by Karolina Cysewska's team, financed by NCRD (NCBR)

The project “Innovative stent coating with polyphenol-rapamycin complex with improved drug-eluting properties to target in-stent restenosis (PoRaCoat)”, financed by the National Center for Research and Development in the amount of 1 423 392,88 PLN from the M-ERA.NET 3 Call 2023 competition, aims to develop an innovative drug release system based on a conductive polymer matrix for commercial cobalt-chromium stents. The project, except Gdańsk University of Technology, involves 3 foreign partners and one company:

  1. Balton Sp. z o.o., Poland
  2. Fraunhofer IKTS, Germany (Coordinator)
  3. University Hospital Dresden, Department of Visceral-, Thoracic and Vascular Surgery, Division of Vascular and Endovascular Surgery (UKD), Germany
  4. National University of Science and Technology Politehnica Bucharest, Romania.

The expected key results of the project will be a prototype of a stent coating based on a conductive polymer matrix PEDOT with an incorporated polyphenol complex and an antiproliferative drug; a system for coating Co-Cr substrates with these coatings by the electrodeposition method will be developed; adding the developed drug complex to the polymer matrix will allow for more effective and safer drug release compared to commercially available solutions. The developed coating prototype will allow for a controlled degradation rate, continuous and uniform drug release in optimal concentrations, appropriate hemo- and cytocompatibility, supporting endothelial adhesion while limiting smooth muscle adhesion.

PI of project in PL: dr inż. Karolina Cysewska.

Project is financed for 36 months and will be realised in dates: 01.06.2024-31.05.2027.

A person chosen for a Post-doc possition in the OPUS 25 project nr. 2023/49/B/ST8/03265

On September 16, 2024, the competition committee chose PhD Eng. Samih Haj Ibrahim, graduated from the Faculty of Materials Engineering, Warsaw University of Technology, for the Post-doc positions in the project OPUS 25 nr 2023/49/B/ST8/03265 „Alternative to alloying: advanced protective coatings for low-cost alloys for solid oxide cell stack technology”.

 

Post-doc position in an Opus 25 project nr 2023/49/B/ST8/03265

Requirements:

  • A doctoral degree in the field of materials engineering or related fields, obtained no earlier than 7 years ago (this period may be extended by the duration of maternity, parental leaves, or long-term inability to work due to illness).
  • A research profile corresponding to the research conducted at the Department of Functional Materials Engineering and in the Opus-25 project no. 2023/49/B/ST8/03265, funded by the National Science Centre.
  • Scientific achievements confirmed by publications in reputable scientific journals.
  • Experience in research on the properties of high-temperature materials, including ceramic and metallic materials.
  • Ability to work in an international team.
  • Good organizational skills, including the ability to handle multiple tasks simultaneously.
  • Fluent communication in English (at least at B2 level).

Job Description:
The responsibilities of the employed person will include, among others:

  • Developing a method for electrospinning polymer and ceramic fibers for use in high-temperature fuel cells.
  • Determining the properties of the produced polymer and ceramic fibers: fiber size, porosity, functional properties.
  • Collaborating with the Institute of Power Engineering (IEn) to apply the produced fibers in IEn's production stacks.
  • Preparing reports, presentations, and scientific publications.

Employment Conditions:

  • Employment in the form of a full-time employment contract (maximum 24 months) in the project "Alternative to alloying: advanced protective coatings for low-cost alloys for solid oxide cell stack technology", nr 2023/49/B/ST8/03265, financed by OPUS 25 NCN competition.
  • First date of employment: 1.10.2024.

Documents:

  • Application letter
  • CV - including a list of scientific and organizational achievements
  • Copies of diplomas or other certificates confirming qualifications

Applications should be sent to the email address: This email address is being protected from spambots. You need JavaScript enabled to view it.
Application deadline: September 13th, 2024
The competition may be closed without selecting a candidate.

GDPR information clause: link.

 

A person chosen for a PhD student-scholarship position in an SONATA 17 project nr 2021/43/D/ST7/01362

On July 31, 2024, the competition committee chose Eng. Izabela Lewandowska, Student from the Faculty of Electronics, Telecommunications and Informatics, Gdańsk University of Technology, for the student-scholarship positions in the project SONATA 17 nr 2021/43/D/ST7/01362 „Development of multifunctional neural electrode with the use of conducting polymer”.

 

Student-scholarship position in NCN project SONATA 17 nr. 2021/43/D/ST7/01362

Student-scholarship position in NCN project titled "Development of multifunctional neural electrode with the use of conducting polymer" / Oferta stypendialna na stanowisko studenta w projekcie NCN pt. "Opracowanie wielofunkcyjnej elektrody neuronowej z wykorzystaniem polimeru przewodzącego". Project nr: 2021/43/D/ST7/01362

Position: Student - scholarship

Requirements:

  • Education: secondary education and 1st or 2nd degree student of higher education in a field of biomedical engineering, materials engineering, chemistry, electronics, or other related,
  • Professional experience: participation in a scientific project or scientific conference for students is appreciated,
  • The minimum required scope of knowledge and experience: basic knowledge in materials engineering, and basic skills in performing electrical/electrochemical measurements (laboratory course) are appreciated. English language skills at min. semi-advanced level.

Description of taks:

  • chemical/electrochemical preparation of PEDOT-based electrodes,
  • performing electrochemical measurements of the electrodes,
  • data analysis,
  • presentation of the results at the conferences.

NCN project type: SONATA – ST

Deadline to submit applications: Termin składania ofert: 31.07.2024

Additional information: In order to apply, please send your CV and motivation letter to the e-mail address:   This email address is being protected from spambots. You need JavaScript enabled to view it.  (PI of the project: dr inż. Karolina Cysewska).

 

A person chosen for a PhD student-scholarship position in an Opus 25 project nr 2023/49/B/ST8/03265 on May 29, 2024

On May 29, 2024, the competition committee chose MSc. Justyna Ignaczak, PhD Student from the Faculty of Electronics, Telecommunications and Informatics, Gdańsk University of Technology, for the PhD student-scholarship positions in the project OPUS 25 nr 2023/49/B/ST8/03265 „Alternative to alloying: advanced protective coatings for low-cost alloys for solid oxide cell stack technology”.

 

PhD student-scholarship position in an Opus 25 project nr 2023/49/B/ST8/03265

[PL] Oferta stypendialna na stanowisko doktoranta w projekcie Opus 25 finansowanym przez Narodowe Centrum Nauki pt. "Alternatywne rozwiązanie dla dodatków stopowych: zaawansowane powłoki ochronne niskokosztowych stali z zastosowaniem w technologii stosów stałotlenkowych ogniw elektrochemicznych".
 
[EN] PhD student-scholarship position in an Opus 25 project funded by National Science Centre entitled "Alternative to alloying: advanced protective coatings for low-cost alloys for solid oxide cell stack technology".
 
Requirements:
 
Education: higher (MSc, MSc. Eng.) in a field of materials engineering, chemistry, electronics, or other related.
Professional experience: participation in a scientific project, attendances in scientific conferences for students, co-author in conference/journal publications.
The minimum required knowledge and experience: basic knowledge in materials engineering, laboratory skills, good organization.
English language skills at an advanced level – reading and active writing skills.
PhD student status (enrolled at Doctoral School).
 
Tasks:
  • Deposition of ceramic protective coatings by electrophoretic deposition (EPD) process.
  • Study of corrosion properties of stainless steel coupons with and without protective coatings.
  • Electrical characterization of coated steel samples.
  • Preparation of scientific manuscripts for publication.
  • Presentation of results at scientific conferences.
Required documents:
  • CV;
  • Cover letter;
  • confirmation of PhD student status;
Type of NCN competition: NCN Opus, edition 49
 
Deadline for applications: 28.05.2024 – 10:00, the results will be announced on 28.05.2024. The earliest start date is 01.06.2024.
 
Conditions of employment: scholarship 2000 PLN/month – 28 months contract.
 
Additional information: please ask any questions by email to This email address is being protected from spambots. You need JavaScript enabled to view it.
 
To apply, please send your CV and cover letter to the e-mail address: This email address is being protected from spambots. You need JavaScript enabled to view it. (PI of the project).
 

A person chosen for a PhD student-scholarship position in an Opus 25 project nr 2023/49/B/ST8/03265

On February 29, 2024, the competition committee chose MSc. Omid Ekhlasiosgouei, PhD Student from the Faculty of Electronics, Telecommunications and Informatics, Gdańsk University of Technology, for the PhD student-scholarship positions in the project OPUS 25 nr 2023/49/B/ST8/03265 „Alternative to alloying: advanced protective coatings for low-cost alloys for solid oxide cell stack technology”.

 

PhD student-scholarship position in an Opus 25 project nr 2023/49/B/ST8/03265

[PL] Oferta stypendialna na stanowisko doktoranta w projekcie Opus 25 nr 2023/49/B/ST8/03265 finansowanym przez Narodowe Centrum Nauki pt. "Alternatywne rozwiązanie dla dodatków stopowych: zaawansowane powłoki ochronne niskokosztowych stali z zastosowaniem w technologii stosów stałotlenkowych ogniw elektrochemicznych".
 
[EN] PhD student-scholarship position in an Opus 25 project nr 2023/49/B/ST8/03265 funded by National Science Centre entitled "Alternative to alloying: advanced protective coatings for low-cost alloys for solid oxide cell stack technology".
 
Requirements:
 
  • Education: higher (MSc, MSc. Eng.) in a field of materials engineering, chemistry, electronics, or other related.
  • Professional experience: participation in a scientific project, attendances in scientific conferences for students, co-author in conference/journal publications.
  • The minimum required knowledge and experience: basic knowledge in materials engineering, laboratory skills, good organization.
  • English language skills at an advanced level – reading and active writing skills.
  • PhD student status (enrolled at Doctoral School).
Tasks:
 
  • Deposition of ceramic protective coatings by electrophoretic deposition (EPD) process.
  • Study of corrosion properties of stainless steel coupons with and without protective coatings.
  • Electrical characterization of coated steel samples.
  • Preparation of scientific manuscripts for publication.
  • Presentation of results at scientific conferences.
Required documents:
 
  • CV;
  • Cover letter;
  • Certificate of participation in Doctoral School;
Type of NCN competition: NCN Opus, edition 49
 
Deadline for applications: 29.02.2024 – 12:00, the results will be announced on 29.02.2024. The earliest start date is 01.03.2024.
 
Conditions of employment: scholarship 2000 PLN/month – 30 months contract.
 
Additional information: please ask any questions by email to This email address is being protected from spambots. You need JavaScript enabled to view it.
 
To apply, please send your CV and cover letter to the e-mail address: This email address is being protected from spambots. You need JavaScript enabled to view it. (PI of the project).
 

A person chosen for a Post-doc possition in the SONATA BIS 8 project nr. 2018/30/E/ST8/00821

On December 14, 2023, the competition committee chose PhD Eng. Samih Haj Ibrahim, graduated from the Faculty of Materials Engineering, Warsaw University of Technology, for the Post-doc positions in the project SONATA BIS 8 nr 2018/30/E/ST8/00821 „High-temperature corrosion studies and development of oxidation lifetime model of alloy powders and sintered porous alloys: effects of composition and microstructure”.

 

Looking for the Postdoctoral Fellow to the project SONATA BIS 8 nr 2018/30/E/ST8/00821

Requirements:

  • PhD degree in electronics / electrotechnics / physics / chemistry / materials engineering / nanotechnology;
  • research profile related to the research conducted in the Department of Functional Materials Engineering and in the project SONATA BIS 8 nr 2018/30/E/ST8/00821;
  • scientific achievements confirmed by publications in reputable scientific journals;
  • experience in research on functional materials properties;
  • ability to work in a group is welcomed;
  • fluent communication in English (min. level B2) is welcomed;
  • very good organizational skills is welcomed.

Job description:

The person employed in the project SONATA BIS 8 nr 2018/30/E/ST8/00821 will do fallowing project tasks:

  • preparation of porous alloys by 3D printing and tape casting methods;
  • analysis of porous alloys: determination of porosity, surface area and other parameters;
  • publishing research results in the international scientific journals;
  • preparation of reports from the research;

Application deadline: December 11, 2023

Required documents:

  1. Application
  2. CV including publication list
  3. Copies of diplomas (MSc, PhD, etc.)

How to apply:   by e-mail to  This email address is being protected from spambots. You need JavaScript enabled to view it.
 

Application should include the following statement (consent for processing personal data for the sake of the recruitment process):

„Wyrażam zgodę na przetwarzanie moich danych osobowych zawartych w mojej ofercie pracy dla potrzeb niezbędnych do realizacji procesu rekrutacji, zgodnie z ustawą z dnia 29 sierpnia 1997 r. o ochronie danych osobowych (tekst jedn. z 2002 r., Dz. U. Nr 101, poz. 926 z późniejszymi zmianami).”

Please note that only selected candidates will be contacted.

Please note that the competition can be cancelled without the selection of candidate.